Craft and Hobby

Custom Stamp



SKILL LEVEL beginner

Beginner Intermediate Advanced
Inspired by all of the creative wrapping paper and holiday cards this season? Why not create your own using custom stamps? It's easy.

by Dremel ®


Grid View List View

Supplies Needed For This Project


3000 Variable Speed Rotary Tool

Model # 3000


Dremel 106 Engraving Bit

Model # 106


225-01 Flex Shaft Attachment

Model # 225-01


  • 1

    Rubber Stamp Block (we used Speedball)
  • 1

    Wax Paper
  • 1

    Brayer Roller (optional)
  • 1

    1/4" Sanded Plywood (optional)

Let's Get Started

To reduce the risk of injury user must read instruction manuals for all tools used in this project. Wear eye and respiratory protection. Use clamps to support work piece whenever practical.


Step 1

Let your creativity flow on this step! You can choose to freehand a design directly onto your stamp block or transfer a printed image. We found many ways to transfer images online. Atlas Quest's tips were helpful! If you're printing from an inkjet printer as we did, we found the wax paper transfer worked best. If you are printing from a laser printer, we found the acetone method of transfer to be easiest. Once you select your image, adjust the size to fit onto your stamp block. Speedball blocks come in various pre-cut sizes. Next, we cut a piece of wax paper to the size of computer paper (8.5 x 11) and fed it into our printer. Once the image printed on our wax paper, we carefully laid it on top of our block to prevent any smudging. Next, we used a brayer roller to transfer the image onto the block. You can use a rolling pin, apply pressure by hand, etc.


Step 2

Next, we used the 3000 tool equipped with the 106 Engraving Cutter bit (perfect for engraving in softer material) to carve along our design. Remember the areas you carve will be the non-inked sections of your design. So for our design we carved out all of the areas that we wanted to remain white. Set your tool at medium to high speed and remove the outer then inner portions of the design. The actual stamped image will appear "raised" after this process is complete. We made our outline around 1/8" wide for a clean, legible stamp.


Step 3

Finally, for easiest stamping we glued our block to a 1/4" thick piece of plywood and cut the stamp & wood to size using the Dremel Saw-Max tool with the SM500 wheel. Since the SM500 wheel has an abrasive finish as opposed to a tooth blade, the wheel smoothly cut through both the stamp and the plywood in one quick cut!


Step 4

Now let the fun begin! We liked the idea of a new-take on the photo Christmas Card. You can also pick up a wide roll of craft paper from your favorite hobby store and make custom-designed wrapping paper year-round!

Suggested Videos

Rotary Tool - Demo

EZ Twist Demo


Rotary Tool - Demo

EZ-Lock Accessories


Saw - DIY

How To Install a Vent Cover


Other Projects You Might Like

Luggage Tag
laser engraving
Luggage Tag

2years ago

Hanukkah Decorations
laser engraving
Hanukkah Decorations

3years ago

Modern Desk Clock
Modern Desk Clock

4years ago

Home Bar Sign
home decor
Home Bar Sign

3years ago

No Promotion available!


Explore the creations added to the Maker Gallery by Dremel Makers.

No Promotion available!


Send us a photo of your Dremel creation so we can share it with the world.


Sign In to post comments on this project.

No comments yet.

No Promotion available!

Dremel Experts

From drilling holes to distressing denim, Dremel’s Customer Service has an answer.