Project Details - dremel.com

like (0) I made it (0) Email Print

STEPS

4

SKILL LEVEL

Easily add Halloween spirit to your home with a festively carved pumpkin. Even the most detailed designs can be accomplished when carving a pumpkin with a Dremel Cordless Rotary Tool.

by Dremel ®

209 PROJECTS

Supplies Needed For This Project

ACCESSORY

EZ Drum™ Mandrel

Model # EZ407SA

Cordless

7000-PK Pumpkin Carving Kit

Model # 7000-PK

ACCESSORY

194 1/8" High Speed Cutters

Model # 194

ACCESSORY

191 High Speed Cutter

Model # 191

Tools & Accessories

Materials

1
Pumpkin
1
Push Pin (optional)
1
Pattern (optional)
1
Skewer (optional)

Let's Get Started

To reduce the risk of injury user must read instruction manuals for all tools used in this project. Wear eye and respiratory protection. Use clamps to support work piece whenever practical.

STEP 1

Step 1

First, if you decide to use a pattern rather than freehand your design, trace along its edge with a washable marker or perforate along the design with a skewer. We chose the perforation technique and found that the easiest way to adhere the pattern to the pumpkin was to secure it with a push pin. Then follow along the pattern, pushing holes into the pumpkin with the skewer.

STEP 2

Step 2

Now we are ready to begin carving! Using your Dremel Cordless Rotary Tool on high speed and a Dremel Carving and Engraving accessory, (we used Dremel accessory #191) begin engraving the design into the pumpkin by following the pattern laid out by the perforations.