by Dremel ®
Let's Get Started
To reduce the risk of injury user must read instruction manuals for all tools used in this project. Wear eye and respiratory protection. Use clamps to support work piece whenever practical.
Once you determine the placement of the shelving, begin mounting the bracket strips to the wall with a Bosch drill. Remember that the wire shelving should be longer than the length between the brackets.
Following the mounting bracket directions, secure the brackets to the strips at the height you want the shelving to sit.
Measure and mark the wire shelving at the final length you want the shelf to be.
Using the Dremel Ultra-Saw and metal cutting wheel, cut the shelf on both ends.
Again, following the mounting bracket and shelving directions, hang the wire shelving on the brackets. Once secure, use the space to clear up room on your workbench.
A TOOL THAT CAN DO IT ALL
Experience Dremel's most powerful oscillating tool. Featuring 7.0 amps of power and 2 new, powerful cutting blades, the Dremel Velocity is the only tool you need.
SHOW US WHAT YOU MADE
Send us a photo of your Dremel creation so we can share it with the world.