by Dremel ®
Let's Get Started
To reduce the risk of injury user must read instruction manuals for all tools used in this project. Wear eye and respiratory protection. Use clamps to support work piece whenever practical.
Download our template on the Getting Started page or create your own. Then spray mount your template to your MDF board.
Cut along the edges of your template pattern using the new Dremel Moto-Saw. Mount your Moto-Saw base station to any table you'd like to work on and snap the tool into place. Place your MS51 Wood and Plastic Cutting blade into your tool. Install your accessory, set your tool to a speed of (6) and cut out your design.
Paint your cut-out and allow it to dry before propping against your frame. Tip: If you are using your own template, be sure to first take measurements of the frame you'd like to build your shelf sitter around and adjust the design accordingly.