by Dremel ®
Tools & Accessories
11" x 2" pine board 31" long
11" x 4" pine board 3-1/2" long
11" x 6" pine board 6" long
11/4" masonite 3" x 8 1/2"
11-1/4" diameter dowel rod 4" long
11" diameter dowel rod 21" long
13-1/2" round bun furniture foot
13/4" x 3-3/8" mug pegs
11/4" fluted dowel pins
1Latex paint or wood stains to decorate
1Brushes to apply paint/stain
1Piping, eyes, nose & beard
Let's Get Started
To reduce the risk of injury user must read instruction manuals for all tools used in this project. Wear eye and respiratory protection. Use clamps to support work piece whenever practical.
Before you begin, download our cutlist (www.dremel.com/webdav/dremel/document_library/dremel-en-us-misc-images/NUTCRACKER%20CUT%20LIST.pdf). Once your pieces are cut and sanded, use wood glue to join the head to the hat as shown here. Tip: Smooth all edges before assembly. Glue all joints except for the jointed arms & mouth/lever, which must move for the cracker to function.
Assemble the arms as shown using wood glue.
Assemble body as shown, insert lever into correct position & drill a hole through all 3 pieces. The hole should be positioned 1 1/2" from top & 3/4" from back. Insert dowels from each side to secure.
Using wood glue attach the legs and feet as shown.
Now you're ready to attach the body to the legs and feet using wood glue again.
Using wood glue, assemble the masonite skirt you cut earlier around the base of the body.
Time to Assemble the arms. To do this, drill holes in the upper arms & insert dowel pins. Then drill holes in upper body sides, and insert pinned arms into the holes.
Attach the head to the assembled body and attach the square base to the feet that you cut earlier. Now for the best part, decorate your nutcracker as desired with latex paint or wood stains. Apply piping, eyes, nose, beard or any other embellishments with wood glue.
Other Projects You Might Like
craft and hobbyPersonalize Your Wine Glasses For Your Next Dinner Party
home repairBurned Rake Handle