by Dremel ®
Let's Get Started
To reduce the risk of injury user must read instruction manuals for all tools used in this project. Wear eye and respiratory protection. Use clamps to support work piece whenever practical.
Once you have the hangers you wish to etch on, draw your pattern onto each hanger. Then, using the Dremel Micro and an engraving bit, such as the Dremel 106 Engraving Cutter, etch the pattern onto the hangers. For soft woods, use a lower speed, and for hard woods use a higher speed. Once done engraving, give them to the bride and groom as a personalized present!