New

Organizational

Chalkboard Lost & Found

STEPS

6

SKILL LEVEL

Build a message board for your laundry room with clips to hold onto anything "lost and found".

by Dremel ®

203 PROJECTS

Supplies Needed For This Project

TOOL

SM20 Saw-Max Tool Kit

Model # SM20

TOOL

4000 High Performance Variable Speed Rotary Tool

Model # 4000

ACCESSORY

SM500 Wood & Plastic Carbide Wheel

Model # SM500

ACCESSORY

543 Cutting/Shaping Wheel

Model # 543

Materials

  • 1

    Vintage Yardstick
  • 1

    1/2" MDF- at least 7" x 13"
  • 4

    Binder Clips
  • 1

    Paintbrush
  • 1

    Chalkboard Paint
  • 1

    Glue
  • 4

    Picture Hangers

Let's Get Started

To reduce the risk of injury user must read instruction manuals for all tools used in this project. Wear eye and respiratory protection. Use clamps to support work piece whenever practical.

STEP 1

Step 1

First, cut the MDF with your Saw-Max™ and wood and plastic cutting wheel to size. We made ours to accommodate the yardstick graphics.

STEP 2

Step 2

After that, cut the yardstick to desired lengths as shown on the image. Ours are 13" and 4 1/2".

STEP 3

Step 3

Cut slots with the Dremel 4000 and 543 Cutting/Shaping Wheel to measure approximately 3/8" deep into the long-sided edge of your MDF, spaced evenly.

STEP 4

Step 4

Paint the MDF with chalkboard paint.

STEP 5

Step 5

Once the paint is dry, glue the binder clips into the slots you cut in Step 3.

STEP 6

Step 6

Then, glue on the cut pieces of the yardstick to your chalkboard piece, and let dry. Lastly, secure picture hangers to the back of the chalkboard and hang onto the wall.

Suggested Videos

Rotary Tool - DIY

Sharpening a Chainsaw

6383

Saw - How-To

How To Flush Cut Baseboard

508

Saw - DIY

Replacing Ceramic Floor Tile

461

Other Projects You Might Like

Address Numbers
home decor
Address Numbers

1year ago

Patio Bench
furniture
Patio Bench

4months ago

Wall Mount Marble Track
home decor
Wall Mount Marble Track

2years ago

No Promotion available!

SHOW US WHAT YOU MADE

Send us a photo of your Dremel creation so we can share it with the world.

No Promotion available!

A TOOL THAT CAN DO IT ALL

Experience Dremel's most powerful oscillating tool. Featuring 7.0 amps of power and 2 new, powerful cutting blades, the Dremel Velocity is the only tool you need.

Comments(0)

Sign In to post comments on this project.

No comments yet.

No Promotion available!

Dremel Experts

From drilling holes to distressing denim, Dremel’s Customer Service has an answer.